Coral Sticker - Size: 7ft x 3ft
Nursery Wall Sticker by Walls of the Wild
Every Walls of the Wild decoration product is a work of art. The images are painted on canvas by the truly gifted artist, Dede Lifgren. Each image is then painstakingly reproduced, making sure that all of the original colour and detail is enhanced through our state of the art printing process. Each self adhesive wall decoration is carefully cut out to create a delightful image on your wall, giving the appearance that a professional wall mural artist has painted the mural right in your room. The wall decoration stickers are designed for indoor use on any flat, clean, dry surface.
Transform a Bedroom or Nursery in minutes
Creating a stunning kids wall mural is as easy as 1-2-3!
- 1 Decide on the stickers that you need to make the wall mural.
- 2 Order them
- 3 When your order arrives, peel of the back of the wall decoration decals and stick them to the wall - Et voila! - A beautiful wall mural in minutes!
It really is easy to fix your wall decoration stickers. There is no special equipment or extra glue necessary - just stick them on the wall!
Materials - Self Adhesive Wall Decorations
All of the images are printed on self-adhesive, peel and stick polyester. The stickers are designed for indoor use on any flat, clean, dry surface.
Adhesive - Removable wall decorations
The wall stickers are fully removable and the adhesive that we use on the wall decorations will not remain on the wall when the stickers are removed.
Adheres to almost any smooth surface such as metal, wood, glass, cardboard, paper, plastic etc.
Do not place a sticker within reach of a young child's crib or bed to avoid the possibility of the sticker falling into the infant's possession without supervision. Avoid placing the stickers near direct sources of heat.
Only apply the sticker to a smooth, clean and dry surface. The sticker may not adhere properly if applied to uneven or textured surfaces. If the walls have been painted within 4 weeks please follow the instructions for special surfaces below. Remove entire backing. Be careful not to bend or kink the sticker. After backing is removed, press exposed sticker to surface. Finish by softly rubbing the entire sticker with a soft cloth, making sure to include all edges. On the larger stickers it may be easier to peel and stick a top portion first and then remove the remaining backing. Finish by rubbing with a soft cloth. If, after completion, you are unhappy with the positioning, simply remove and stick again. If the sticker does not stick well or curls at the edges, follow the instructions below.
To apply to rough or glossy surfaces
The stickers work best on flat walls with clean, dry flat paint. They will work on other surfaces with varying degrees of success. When you get your order, if possible try a small sticker. If it doesn't stick well, you can use an adhesive that does not melt or dissolve Polystyrene such as 3M® Super77. To use a spray adhesive lay some newspaper down and place the sticker face down on the newspaper. Spray the adhesive on the back of the sticker and let it dry for 15 minutes (or as spray manufacturer instructs). The adhesive should be dry when you put the sticker up or it will create a more permanent bond. Be careful not to get glue on the face of the sticker. Very glossy surfaces might require extra glue as well. For these cases an adhesive such as 3M® Hi-Strength 90 can be used. We recommend that this procedure be used in high traffic and commercial installations such as nursery schools and paediatric centres. The use of a 3rd party adhesive is not guaranteed in any way.
The stickers can be simply peeled off. If you find a sticker pulls off the paint, you can release the sticker by squirting lighter fluid on the wall above the sticker. The lighter fluid will run down the wall and soften the adhesive. The lighter fluid will evaporate off the wall in a few minutes. Once the sticker is off, lay it face down for a few minutes and let the lighter fluid evaporate. You can then re-apply the sticker.
Use a cloth or paper towel moistened with water only and gently blot. Do not soak, rub or use soap or abrasives.
Reviews / Comments
No reviews have been made for this product.